Advertisement
11/08 Rev. 5.01-01
Proper usage
Protection against
injuries by electri-
cal current
USER MANUAL
Operational safety of the unit
Applicators of type LA-BO are additional units for Avery Dennison print-and-
apply or labelling heads. The applicators take self-adhesive labels from the
dispenser mechanism and stick these onto moving or non-moving products.
The company operating the unit must install it with suitable equipment to pro-
tect operating personnel from danger; for example, the danger of hands or
fingers being crushed by reaching in between the product and the dispensing
edge.
WARNING!
Improper usage of the unit can cause accidents, property damage and pro-
duction downtime!
Only use the unit in accordance with the instructions specified in this manual.
Only configure the unit in accordance with this manual and with the required
care.
Only use original accessories.
Do not make any modifications or alterations to the unit.
Repairs to the device may only be performed by authorised specialists who
are aware of the risks involved.
Applicators of type LA-BO operate using low voltage 24 V DC supplied by
Avery Dennison print-and-apply or labelling heads.
WARNING!
Never connect the LA-BO unit directly to mains voltage!
Only operate the unit once the housing has been reassembled properly.
Before cleaning, switch off the Avery Dennison print-and-apply or labelling
head and remove the power cable from the socket.
WARNING!
The unit is not protected against splashing water.
Keep the unit dry.
If liquids have penetrated the LA-BO unit, switch the Avery Dennison print-
and-apply or labelling head off and disconnect or unplug it's power cable im-
mediately. Inform a service technician.
LA-BO
4
Safety Instructions
Advertisement
