Deleting Jobs / Batches / Measurements; Carcheck System Plus Software At A Glance; Creating Jobs - Automation Dr. Nix CarCheck System PLUS User Manual

CarCheck System PLUS

5.7 Deleting Jobs / Batches / Measurements

You can delete single measurements using the option described in the section only (p. 21). It is
accessible in Memory mode (Job mode).
The following options for deleting the complete memory and all measurements are available only when
the gauge is switched to the Individual measurement mode.
5.7.1 Delete Memory
You can delete the complete memory including the names of batches (car parts) and job information
using the following option:
Main Menu ▼ Memory ▲ Delete All
5.7.2 Delete All Measurements
Using this option will delete all measurements and job names stored within the gauge. Names of
batches (car parts) remain saved. You can access this option via
Main Menu ▼ Memory ▲ Delete Values
Note:
In Memory mode (Job mode) the Memory menu contains no options that would allow measurements
to be deleted. Deletion of measurements in this mode is only possible with the above (p. 21)
mentioned menu option Delete Last. Therefore, you can access certain delete functions only after you
left the memory mode.

6 CarCheck System PLUS Software at a Glance

6.1 Creating Jobs


Run the software. The Table view appears:

Click the button. The Record view appears:
Appendix
22/44