AGFA DX-D 400 User Manual page 83

DX-D 400 | Technical Documentation | 83
Recommended
separation dis-
tance
d = 1.2
d = 1.2 80
MHz to 800 MHz
d = 2.3 800
MHz to 2.5 GHz
where 'P' is the
maximum output
power rating of
the transmitter in
watts (W) accord-
ing to the trans-
mitter manufac-
turer and 'd' is the
recommended
separation dis-
tance in meters
(m).
Field strengths
from fixed RF
transmitters, as
determined by an
electromagnetic
site survey, should
be less than the
compliance level
in each frequency
rangeb).
Interference may
occur in the vicini-
ty of equipment
marked with the
following symbol:
• REMARK 1: The higher value will apply at 80 MHz and 800 MHz.
0230D EN 20191209 1135