80 | DX-D 400 | Technical Documentation
Technical Documentation
This appendix contains technical information. It is only available in English.
Remarks for HF-emission and immunity
Table 2: Guidance and manufacturer's declaration on electromagnetic
emissions (IEC 60601-1-2)
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
0230D EN 20191209 1135
Warning: This device is intended for use by healthcare
professionals only. This device may cause radio interference
or may disrupt the operation of nearby equipment. It may be
necessary to take mitigation measures, such as re-orienting
or relocating the device or shielding the location.
Warning: The HF-emission and immunity can be influenced
by connected data cables depending on length and the
manner of installation.
Emission test
Compliance
Group 1
The device uses RF energy only
for its internal function. There-
fore, its RF emissions are very
low and are not likely to cause
any interference in nearby
electronic equipment.
Class A
The device is suitable for use in
all establishments other than
domestic and those directly
connected to the public low-
Class A
voltage power supply network
that supplies buildings used for
domestic purposes.
Complies
Electromagnetic environ-
ment - guidance