AGFA DX-D 400 User Manual page 84

84 | DX-D 400 | Technical Documentation
• REMARK 2: These Guidelines may not apply to all situations. The disper-
sion of electromagnetic waves is influenced by absorption and reflec-
tions from buildings, objects and people.
The field strength of stationary transmitters, such as base stations of radio
telephones, mobile broadcasts for rural areas, amateur stations, and AM and
FM radio transmitters, cannot be precisely predetermined theoretically. An
investigation of the location is recommended, to ascertain the electromag-
netic environment as a result of stationary high frequency transmitters. If
the field strength of the device exceeds the level of agreement given above,
the device must be observed with regard to its normal operation at each
place of use. In case of unusual performance characteristics, it can be neces-
sary to take additional measures, such as the re-orientation of the device, for
example.
The field strength will be lower than 3 V/m above the frequency range from
150 kHz to 80 MHz.
Radio frequency communications equipment can effect medical electrical
equipment.
This device is intended for operation in an electromagnetic environment in
which the radiated high frequency disturbance variables are monitored. The
user of the device can help to prevent electromagnetic disruptions by
maintaining the minimum distances between portable and mobile high
frequency communication equipment (transmitters) and the device as
recommended below, in accordance with the maximum output power of the
communications equipment.
Recommended Protective Distances between Portable and Mobile High Fre-
Rated Power of
the Transmitter
0.01
0.1
1
0230D EN 20191209 1135
quency Communication Equipment and the Device
Protective Distance in accordance with Transmission
W
150 kHz to 80
MHz
d = 1.2
0.12
0.38
1.2
Frequency
m
80 MHz to 800
MHz
d = 1.2
0.12
0.38
1.2
800 MHz to 2.5
GHz
d = 2.3
0.23
0.73
2.3