1/2.5/5/10Gbps Ethernet Copper Port Leds; Figure 4: Link/Activity Leds On The 1/2.5/5/10Gbps Copper Port - Allied Telesis x330-10GTX Installation Manual

1/2.5/5/10Gbps
Ethernet Copper
Port LEDs
Table 3. Link/Activity LEDs on the 10/100/1000Mbps Copper Ports
State
Off
Table 4 describes the duplex mode LEDs on the 10/100/1000Mbps
Ethernet copper ports.
Table 4. Duplex Mode LEDs on the 10/100/1000Mbps Copper Ports
State
Solid Green
Solid Amber
Flashing Amber
Off
The 1/2.5/5/10Gbps copper port has two LEDs that display link/activity and
speed information. The LEDs are shown in Figure 4.
2.5/5/10Gbps LED
Figure 4. Link/Activity LEDs on the 1/2.5/5/10Gbps Copper Port
x330-10GTX Gigabit Ethernet Switch Installation Guide
Description
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
Description
The port is operating in full duplex mode.
The port is operating in half duplex mode.
The port is operating in half duplex mode,
with collisions.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
1000Mbps LED
27