Sfp+ Port - Allied Telesis x330-10GTX Installation Manual

SFP+ Port

The SFP+ port on the switch supports the following types of SFP
1000Mbps and SFP+ 10Gbps transceivers:
 1Gbps 1000Base-SX/LX SFP transceivers
 1Gbps single-port BiDi 1000Base-LX SFP transceivers

1Gbps 1000Base-ZX SFP transceivers

10Gbps, 10GBase-SR/LR fiber optic transceivers

1-meter SP10TW1 and 3-meter SP10TW3 10Gbps direct connect
twinax cables with SFP+ transceiver-style connectors
You can use the port to connect the switch to other network devices over
large distances, build a high-speed backbone network between network
devices, or connect a high-speed device, such as a server, to your
network.
The switch supports a variety of short and long distance SFP and SFP+
modules. Refer to the product's data sheet for a list of supported modules.
Note
The SFP+ port does not support 100Mbps 100Base-FX
transceivers.
Note
The port supports full-duplex mode only.
Note
SFP and SFP+ transceivers are sold separately.
Note
The switch does not support the 7-meter SP10TW7 direct connect
twinax cable.
x330-10GTX Gigabit Ethernet Switch Installation Guide
25