Figure 8: Switch Id Led With Low Power Mode Enabled - Allied Telesis x330-10GTX Installation Manual

Chapter 1: Overview
32
Note
You can use the SHOW SYSTEM ENVIRONMENT command in the
command line interface to identify the source of the problem.
The states of the LED when low power mode is enabled are shown in
Figure 8.
The switch is the master switch of a VCStack.
(The x330-10GTX switch does not support stacking.)
The switch is a standalone unit.
The switch is a member switch of a VCStack.
(The x330-10GTX switch does not support stacking.)
Figure 8. Switch ID LED With Low Power Mode Enabled