Raven Hawkeye 2 Installation Manual page 28

Hide thumbs Also See for Hawkeye 2:

Table of Contents

CHAPTER 5

2. Route the Hawkeye® 2 power cable through one of the battery box pass-through holes and to the inside right

frame rail and lower center rack linkage to the RCM - Sprayer cable.

NOTE:

Follow existing hoses and wires.

FIGURE 13. NCV HC Power Cable

3. Connect the round 3-pin plug to the mating receptacle on the Hawkeye® 2 RCM - Sprayer cable (P/N 115-

2005-027).

4. Connect positive cable from the Hawkeye® 2 power cable (P/N 115-2005-008) to the positive battery post

terminal.

IMPORTANT:

Ensure the rubber isolators are installed on the circuit breaker posts and secure the circuit breaker so that

the posts cannot come into contact with metal or the battery posts.

5. Secure to the sprayer chassis with cable ties.

Hawkeye® 2 Installation Manual for Case IH Patriot (MY 2009-2016)

Table of Contents