If An Error Is Detected In The Self-Check - Renesas M3062PT-EPB User Manual

4.3.2 If an Error is Detected in the Self-check

If the self-check does not result normally (ERROR 1 to ERROR 4 in Figure 4.3), check the following.
• Whether the emulation probe and PC7501 are connected properly.
• Whether the proper firmware has been downloaded.
IMPORTANT
Note on Self-check:
• If the self-check do not result normally (excluding target system errors), the
emulation probe may be damaged. Then contact your local distributor.
( 50 / 80 )