Table of Contents
Advertisement
3.5 Data Slicer I/O Signal and FSC Clock I/O Signal Circuit
With this product, the parts which are used for the data slicer and the FSC clock circuit are connected
by sockets to be changed. Figure 3.11 shows the position of each part which is used for the data slicer
and the FSC clock circuit. Figure 3.2 shows the layout of the parts and Figure 3.12 shows its detailed
layout.
Figure 3.11 Data slicer and FSC clock circuit
Figure 3.12 Detailed layout of the parts
( 40 / 76 )
Advertisement
Table of Contents
