Table of Contents
Advertisement
(2) Inside of the Emulation Pod
Figure 2.2 Internal view of the emulation pod
(1) MCU-dependent boards 1 and 2
Boards grouping parts (pins and added functions) which vary according to MCU model.
(2) Base board
Board for the M16C/60 and M16C/20 Series MCUs which controls the interface with the PC4701
and the evaluation MCU.
(3) Memory board
Board on which is mounted the emulation memory (1 MB) and the map memory (4 bit×1M) for
the M16C/60 and M16C/20 Series MCUs.
(4) Oscillator circuit board
Oscillator circuit board on which the oscillation module device (10 MHz) and the crystal
oscillator (32.768 kHz) are mounted.
(5) Power circuit board
Power circuit board which determines the power voltage in the pod according to the power voltage
level of the target system.
( 25 / 76 )
Advertisement
Table of Contents
