Table of Contents
Advertisement
3.4 A-D Conversion Bypass Capacitor
With this product, there is a socket (0.1 µF pre-mounted) on the board for changing the bypass
capacitor for the A-D conversion circuit. Remove or replace a suitable bypass capacitor as occasion
demands.
Figure 3.9 shows where the bypass capacitors are mounted, whereas Figure 3.10 shows an
enlargement of the foot patterns.
Figure 3.9 Position for mounting the A-D conversion bypass capacitor (M306H2T-PRT board)
Figure 3.10 Socket for the A-D conversion bypass capacitor
Note on the A-D Converter:
I/O signal circuit
for data slicer
• Because a flexible board and other devices are used between the evaluation MCU
and the target system, the A-D converter operates differently from the actual MCU.
Make the final evaluation of the A-D converter from the actual MCU.
Position to install the bypass capacitor
for A-D converter
AV
- AV
bypsass capacitor
CC
SS
V
- AV
bypsass capacitor
REF
SS
IMPORTANT
( 39 / 76 )
Advertisement
Table of Contents
