(3) Replacing the Oscillator Circuit Boards
Figure 3.8 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit
board, see Figure 3.2.
Figure 3.8 Replacing the oscillator circuit boards
(1) Unscrew the screw securing the oscillator circuit board.
(2) Lift off the oscillator circuit board.
(3) Attach the J1 connector of another oscillator circuit board for
replacement to the connector of the MCU-dependent board.
(4) Secure the oscillator circuit board with the screw.
( 38 / 76 )