Installing The Zoom Lenses For Q Series; Installing The Zoom Lens - Christie Q Series Installation And Setup Manual

Installing the zoom
lenses for Q Series
Learn how to install and remove the zoom lenses for the Q Series projectors.

Installing the zoom lens

Only use lenses designed for the projector model.
1. Pull out the dust protector to remove it.
Christie recommends keeping the dust protector and packing materials for future use.
Dust protector
2. Remove the front cover:
a) Slide the upper part of the front cover upward while pressing the front cover from the
underside and remove from the projector.
b) Slide the lower part of the front cover downward while pressing the front cover from the
upper-side and remove from the projector.
3. Install the lens:
a) Remove the lens cap from the lens.
b) Turn the lens groove upward.
Optional Lenses Q Series Installation and Setup Manual
020-102550-01 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Front cover (upper part)
Front cover (lower part)
6