Wall Installation
Run a yellow RJ45 cable through a 25 mm diameter hole in the wall.
Plug in RJ45 cable and secure the controller in the control bracket.
a
To indoor board
Wall mates (x2)
Plyboard wall
NOTE:
•
Use provided wall plug (x2) in lieu of wall mates if applicable.
•
Use provided screws
•
Wall mates or wall plug must be totally flush to the wall.
•
Hole for cable MUST NOT be MORE THAN 25 mm in diameter
•
Caution should be taken to ensure that there is adequate hole clearance and
wall cavity depth to avoid unnecessary pressure to the cable and its connection
point.
6
Wall controller
Screw (x2)
Control bracket
b