ActronAir QUE QTW-1000 Installation And Commissioning Manual page 20

Option 3: Zone will use both remote sensor and zone controller
to average temperature reading.
(i) Follow the steps of Option 3 to use remote sensor. Then on
screen, touch 'add a zone device'.
(ii) Touch 'zone controller'. Then follow the same process as using
zone controller in Option 2.
(iii) Setup screen will show two devices are paired to the zone.
NOTE:
It is also possible to pair the zone controller first, before pairing the remote
sensor.
Option 4: Zone is assigned to two remote sensors
Follow the same process as Option 4. However, instead of zone
controller, select zone sensor as a second device.
NOTE:
Pairing two zone controllers in one zone is not allowed.
20