Table of Contents
Advertisement
On the next screen touch '
4
Master controller will start to search for secondary controller.
Connect the secondary controller to the WiFi network.
5
Follow the same process as (1) Connect WiFi.
NOTE:
Make sure that the secondary controller is connected to indoor board
terminal (secondary), powered ON and connected to the same SSID point
as the master controller.
6
When successful, the screen will show that 1 main controller has
been connected. Touch
to ensure that the correct controller is connected. Touch 'Done'
to proceed to next process.
Next screen will show the two controllers connected. WiFi
7
strength and serial numbers of both controllers are displayed
on the screen
NOTE:
Once connected to the internet, the secondary controller will
immediately check for a software update. It is highly recommended
to let the update be installed before proceeding.
14
' to start the process.
to proceed. Check the serial number
Secondary controller screen
Hide quick links:
Advertisement
Table of Contents
