ActronAir QUE QTW-1000 Installation And Commissioning Manual page 29

6. Q: Can I connect the Master and Secondary Controllers to power source other than the indoor board?
A. No, both the Master & Secondary Controllers must be connected to the indoor board, where they are both allocated
a dedicated terminal.
7. Q: What power source options are available for the Zone Controller and Remote Sensor?
A. You have a wired option whereby you use the RJ45 cable from the damper motor, or a wireless option whereby you
use AAA batteries.
Note: Do not use both power sources at the same time.
8. Q: If I replace a defective Master Controller do I need to set up the whole system again?
A. Yes. You need to complete the commissioning process again.
9. Q: If I replace a defective Secondary Controller do I need to set up the whole system again?
A. No. Simply connect the new Secondary Controller, ensuring it is configured to the same WiFi connection as the Master
Controller. Then from the Master Controller simply go to Menu>Settings>System Setting>Main Controller settings. Once there,
remove the link of the old Secondary Controller and update to link to the new Secondary Controller.
10. Q: Can I swap the master controller to the secondary controller and vice versa?
A. No . If you do, it will impact the operation of the system.
29