Table of Contents
Advertisement
Start Up
(1) Connect WiFi
NOTE:
This process maybe skipped if WiFi network is not available. This may be
completed later by going to '
1.
On master controller, press (hold for 3 seconds then release)
1
MENU button to turn ON the system. Wait for a few seconds
as the controller will start to boot up.
2.
On next screen touch 'Begin setup process' button. Touch
2
the first circle, 'Connect WiFi'.
3.
On the next screen touch
3
WiFi network. Select your access point from the WiFi
network list.
4.
Enter the WiFi password then touch 'Join'.
4
5.
When the WiFi is successfully connected, touch 'Next' to
5
proceed to next process (Account Setup).
NOTE:
QUE System must have a user account and internet connection in order to
use features such as energy history, remote connection via QUE Connect
App and over-the-air (OTA) software updates.
QUE system connection to internet is only available through WiFi network.
Once connected to the internet, the controller will immediately check for
a software update. It is highly recommended to let the update be installed
before proceeding. You need a WiFi connection in order to link the
secondary controller.
Menu ' > 'Settings' > 'WiFi Settings'.
to start searching for available
11
Hide quick links:
Advertisement
Table of Contents
