ActronAir QUE QTW-1000 Installation And Commissioning Manual page 17

Option 1 : Zone will use the zone controller
(i) Touch 'A new zone controller'.
(ii) Follow the on screen instructions.
(iii) On the right side of the zone controller, press and hold the
pair button for three seconds.
Green blinking light means pairing is successful.
Red blinking light means pairing has failed. Repeat this
step until pairing is successful.
VX.XX
Connecting Connected
Connecting Connected
This device is now This device is now This device is now connected This device is now connected
trying to connect trying to connect to the main controller. to the main controller.
to the main controller. to the main controller.
Please return to the main Please return to the main
Please wait Please wait controller controller to complete setup. to complete setup.
(Zone controller screen)
Pair button
(press here)
17