ActronAir QUE QTW-1000 Installation And Commissioning Manual page 25

1. Select the zones that will be included in self learn mode.
10
Touch 'Ok'.
1. System will start self learn mode. Fan will randomly stop
11
and run until it finishes Stage 3 test. Touch 'Finish' when
the option appears.
1. Next step will start Run system to check if the system is
12
cooling and heating. Touch
Start Cancel
1. System will start 3 minutes countdown before it begins
13
cooling test.
1. Screen will show the system in cooling. Wait for the compressor
14
speed to reach more than 50%. Go to nearest air outlet and
observe if the air is cold. If yes touch
heating test.
.
to proceed to
Start Cancel
25