Base Controls - Mechanical - Skyjack SJKB-40-D Operating Maintenance Instructions & Part List

9. EMERGENCY STOP BUTTON - When struck, this
red push-button switch disconnects power to the control
circuit. In the event of an emergency or at work platform
shut down, push button in. To restore power, simply pull
button out.
10. CIRCUIT BREAKERS - In the event of a power
overload or positive circuit grounding, the circuit breaker
will pop out. Make the necessary corrections, then
depress the push-button to reset.
11. ENGINE STOP/RUN/START SELECT SWITCH -
Turning the switch to the "
engage the starter, once the engine starts, release the
switch and it will return to the "
stop the engine turn the switch to the "
position. The engine must be running before any
functions can be operated.
12. ENGINE CHOKE/GLOW PLUG SWITCH - This
switch when held in the " ñ " (up) position, activates
the electric choke on gasoline engines or the glow plugs
on the optional diesel engine.
13. EMERGENCY PUMP SELECT TOGGLE SWITCH
- In the event of an emergency, moving this toggle switch
to the" ñ " up position kills the engine, enables the 12
volt emergency pump and allows all functions to be
operated. To resume normal operation, move the switch
to the down position by closing the switch cover.
14. FUEL GUAGE - Electronic fuel level guage.
15. VOLT METER - This meter displays battery voltage.
16. HOUR METER - Activated by the ignition system,
this guage measures engine running time.
17. 110 VOLT RECEPTACLE (Power to platform) -
This 110 volt receptiacle is used to provide power to the
platform for operating tools.
SJKB-40-D, SJKB-40-D/F
" (start) position will
" (run) position. To
" (stop)
JUN. 1999
Battery Disconnect Switch
1
Figure 2-2. Battery Disconnect Switch
1. BATTERY DISCONNECT SWITCH
1. BATTERY DISCONNECT SWITCH - This switch,
located on the rotating turret near the electrical panel,
disconnects power to both control stations in the event
of an emergency and for work platform shut down. This
switch MUST be turned to ''ON'' position to start the
engine or operate any control on either of these control
stations.
DO NOT disconnect power while engine is running,
DO NOT use this switch to turn engine off. Damage
to engine may occur.

Base Controls - Mechanical

Manual Fuel Shut-Off Valve
Figure 2-3. Fuel Shut-Off Valve
1. FUEL SHUT OFF VALVE
1. FUEL SHUT OFF VALVE - This valve located in the
fuel supply line near the bottom of the fuel tank turns off
the supply of fuel to the fuel pump.
Ma40-202
CAUTION
Ma40-203
SECTION 2, Page 3
1