Recommended Hydraulic Oils; Recommended Axle Lubricant - Skyjack SJKB-40-D Operating Maintenance Instructions & Part List

BRAKE OPERATION TEST PROCEDURE
Proper operation of the parking brakes should be checked daily or at the beginning of each shift. Locate the machine
in an appropriate area for testing the brakes. IMPORTANT NOTE: The area for testing the machine MUST be completely
level and free of obstructions. DO NOT drive on an incline unless the parking brakes are working properly. With the
machine fully stowed and the throttle switch in the high position (if engine powered). Drive the machine forward at full
speed and remove foot from foot switch. Repeat this step driving in reverse.
Parking brakes will instantly engage causing the machine to stop immediately.
The machine should come to an instant and abrupt stop. If the machine does not stop instantly or if the machine pulls
to one side while stopping, the brake adjustment MUST be checked before putting the machine into service.
MODEL NUMBER___________________________ SERIAL NUMBER______________
RECORDING
DATE
RECORDING
YEAR #
OWNERS NAME
INSPECTED
BY
Model
STANDARD
FOAM FILLED
(Option)
* 28 Durometer Fill installed at 55 psi.
Model
SJKB-40-D, SJKB-40-D/F
NOTE: Refer to capacity label on work platform for additional information.

RECOMMENDED HYDRAULIC OILS

DO NOT use synthetic or fire resistant oil in this work platform. Use ATF Dexron III (ESSO) or equivalent hydraulic oil.
For conditions causing oil temperatures below -31°F (-35° C) and above 122°F (50° C) consult Skyjack, Inc.

RECOMMENDED AXLE LUBRICANT

TWO WHEEL DRIVE: SAE 80W90 GL-5 gear oil.
FOUR WHEEL DRIVE: Sunoco duragear (synthetic) SAE 75W90 gear oil or equivelant.
SJKB-40-D, SJKB-40-D/F
Table 2-2. Owners Annual Inspection Record
1 2
Table 2-3. Tire Specifications
Tire
Size
30 x 10.00 x 16.5
30 x 10.00 x 16.5
Table 2-4. Maximum Platform Capacities
WARNING
3 4
Rating
10 Ply
10 Ply
Platform Capacity (unrestricted)
500# (227kg) 2 occupants
JUN. 1999
5 6
Fill Specification
Type
Air
Solid Urethane
SECTION 2, Page 11
7 8
Mt40c-202
Pressure
55 psi
*
Mt40c-201
Mt40c-203