Section 6 Parts List - Skyjack SJKB-40-D Operating Maintenance Instructions & Part List

GENERAL
The information contained in this section is designed to
aid the user in locating and identifying replacement parts.
Component parts of various assemblies and sub-
assemblies comprising the work platform are illustrated
and accompanied by a descriptive parts list. Exploded
drawings are used to show relative location of component
parts in disassembly order. If a part cannot be found in
this section, order by work platform model number and
serial number, giving a complete description of the part.
PARTS ORDERING INFORMATION
When ordering replacement parts, the complete part
number and description should be used to ensure proper
identification and delivery of the desired item. This
complete identification should also be used when
requesting equipment information.
METHOD OF LISTING
Parts are listed in order according to the reference number
shown in the illustration, followed by a full description
based upon the "NOUN FIRST" method. That is, the noun
name of the part is listed first, then the modifying
description information which serves to specifically
identify the item. For example: PIN, Clevis. Assemblies
or groups are shown at the beginning of a parts list and
are identified with the letter references A, B, C, etc.
Individual parts in these lists have corresponding letters
after their description to identify which assembly or group
it is used in. Individual parts without identifying letters
are used in all the assemblies or group shown at the
beginning of the parts list. Descriptions preceded with an
(•) indicates a serviceable component or attaching
hardware for the higher level assembly. The $ symbol is
used where the part number was not available at the time
of printing or for some other reason it is requested that
you consult the factory before ordering the part.
CUSTOMER___________________________________________________________________
DEALER______________________________________________________________________
MODEL NUMBER ______________________________________________________________
SERIAL NUMBER ______________________________________________________________
DATE PURCHASED ____________________________________________________________
USE ONLY SKYJACK AUTHORIZED REPLACEMENT PARTS!
SJKB-40-D, SJKB-40-D/F
SECTION 6
PARTS LIST
QUANTITIES (Units per Assy.)
The quantities of each part that are required to complete
the assembly. If quantity is (AR), it is understood that
the quantity may vary when machine is equipped with
certain options. Order quantity as needed.
HARDWARE
Standard screws, washers, nuts, etc. are not identified
by a reference number. These parts are known as
COMMON HARDWARE items and appear indented
under the major items with which they are used. They
should be ordered separately as listed, since they are
not component parts of the pieces they attach to.
HOW TO ORDER REPAIR PARTS
1. Address all orders to your local SKYJACK dealer.
2. Specify model and serial number of the work platform
(found on the serial number plate).
3. List the quantity needed.
4. List the length needed (if bulk item).
5. List the part number and description as shown in
this manual for each item.
6. Show billing and shipping address and name of
individual if possible.
7. Suggest best routing.
JUN. 1999
6
SECTION 6, Page 1