[Emergency Rec] Perform The Settings For Emergency Recording; Resolution; Recording Rate And Quality; Auto Copy - Panasonic WJ-HD316 Operating Instructions Manual

Important:
• When a live image from the audio assigned camera
channel is displayed on a single screen on the monitor
2, audio will be heard. When displaying on a multi-
screen, audio will not be heard.
• When images from the audio assigned camera channel
are displayed on a single screen, recorded audio will
be heard. When displaying on a multiscreen, recorded
audio will not be heard.
• Audio will be recorded regardless of displaying on a
single screen or a multi-screen.
w [Emergency REC] Perform the
settings for emergency recording
Perform the settings for emergency recording such as
recording time or recording rate for emergency record-
ing.
Refer to page xx for further information about emer-
gency recording.
SETUP MENU
Maintenance
REC Setup
Emergency REC

• Resolution

Select a recording resolution from the following.
FRAME 3D ON: High resolution (720 x 480), with cam-
era shake compensation
FRAME 3D OFF: High resolution (720 x 480)
FIELD: Standard resolution (720 x 240)
SIF: Low resolution (360 x 240)
• Recording Time
Perform the settings of recording time and recording
action for emergency recording.
The following are available for recording time.
1 s - 10 s (in 1 second intervals)
20 s/30 s
1 m - 10 m (in 1 minute intervals)
20 m/30 m/40 m/50 m/60 m
MANUAL: Recording will continue while the external
switch is being held down.
CONTINUE: Recording will not stop until the [ALARM
RESET] button on the front panel of the unit is
pressed.
• [Recording Rate and Quality]
Perform the settings of recording rate and image quality
for emergency recording.
The following are available for recording rate.
OFF/1 ips/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30
ips/60 ips
92
Recording Event Schedule
LIVE
Switcher Display Com System
Resolution FIELD
Recording Time
10s

Recording Rate and Quality

RATE QUALITY RATE QUALITY
CAM1 3ips VFA CAM9 3ips VFA
CAM2 3ips VFA CAM10 3ips VFA
CAM3 3ips VFA CAM11 3ips VFA
CAM4 3ips VFA CAM12 3ips VFA
CAM5 3ips VFA CAM13 3ips VFA
CAM6 3ips VFA CAM14 3ips VFA
CAM7 3ips VFA CAM15 3ips VFA
CAM8 3ips VFA CAM16 3ips VFA

Auto Copy

OFF
Important:
• When OFF is selected for a specified camera channel,
images from a camera channel set to OFF will not be
recorded.
• When "FRAME 3D ON" or "FRAME 3D OFF" is selected,
the total recording rates of CAM 1 - CAM 16 (for WJ-
HD316) must be less than 30 ips.
• When "FIELD" is selected, the total recording rates of
CAM 1 - CAM 16 (for WJ-HD316) must be less than 60
ips.
• When "SIF" is selected, the total recording rates of CAM
1 - CAM 16 (for WJ-HD316) must be less than 120 ips.
• When "FRAME 3D ON", "FRAME 3D OFF" or "SIF" is
selected, it is impossible to select 60 ips.
The following are available for image quality.
SFA/SFB: Top quality (SUPER FINE)
FQA/FQB: High quality (FINE)
NQA/NQB: Standard quality (NORMAL)
EXA/EXB: Low quality (EXTENDED)
**A is suitable for less dynamic images.
**B is suitable for more dynamic images.
• [Auto Copy]
Select ON or OFF to set whether or not to automatically
copy images recorded by emergency recording onto
the copy area on the built-in hard disk or DVD-RAM
disk.
Important:
When OFF is selected for "Auto Copy" on "Basic setup"
of "System", the auto copy function will not work after
emergency recording even though ON is selected for
this setting. Select "HDD", "COPY 1" or "COPY 2" for
"Auto Copy".