INSTALLATION IN THE RACK
1. Remove the rubber legs (6 pcs.) on the bottom of the
unit.
• Use a flat-blade screwdriver and remove the screws.
2. Install the rack mounting brackets on both sides of the
unit.
• Using the mounting screws (4 pcs.) for the rack mount-
ing brackets, fix them firmly.
3. Install the unit in the rack.
• Fix the unit firmly with the rack mounting screws (4
pcs.).
Important:
• The cooling fan inside the unit is perishable and necessary to be replaced periodically.
• Do not block the ventilation openings or slots in the cover to prevent the unit from overheating.
• If the rack is subject to vibration, secure the rear of the unit to the rack using additional mounting brackets (procured local-
ly).
Mounting screws for rack mounting brackets
(accessories)
Rack mounting brackets (accessories)
Rack mounting screws
For our rack: Nominal diameter 5 tapping (accessory)
Remove the rubber legs.
59