Recording-Camera Setup; Emergency Recording (Time Lapse Recording) - Panasonic WJ-HD500A Operating Instructions Manual

Recording-camera Setup

Any of the cameras can be excluded from the specific timer
recorder by this setting.
(Continued from Program Timer)
1. In the 3-1 PROG1 window, for example, move the cur-
sor to the desired timer recorder from 1 to 4, and then
press the SET button.
The REC CAM SETUP menu for the selected timer
recorder appears on the monitor screen displaying the
assigned camera group for each camera.
3-1-1-5 PROG1-NO1 REC-CAMERA SETUP
CAM GROUP
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
2. Move the cursor to the desired camera, then select a
parameter using the + or - button.
OFF: The camera is excluded from recording for the
timer recorder.
1-4: The camera is included in recording for the timer
recorder.
The factory default setting is any of 1-4.
3. Press the SET/ESC button to return to the previous pro-
gram number menu.
56
CAM GROUP
9 1
10 1
11 1
12 1
13 1
14 1
15 1
16 1
Emergency Recording
(Time Lapse Recording)
The Emergency Recording is given priority to record all
video inputs in Time Lapse Recording reacting to a signal
input form the CONTROL port.
These items let you determine the recording parameters for
Time Lapse Recording when the input signal is received
from pin 21 of the CONTROL port located on the rear of the
Disk Recorder.
1. Move the cursor to EMERGENCY in the WJ-HD500
SETUP menu by pressing the D or C button.
2. Select either audio recording function by pressing the
+ or - button, then press the SET button.
The selected EMERGENCY REC SETUP menu shown
below appears on the monitor screen.
4 EMERGENCY REC SETUP(WITHOUT AUDIO)
EMERGENCY REC MODE
REC RATE
REC QUALITY
DURATION
REC-CAMERA SETUP
3. Move the cursor to the EMERGENCY REC MODE para-
meter in the menu by pressing the D or C button, then
select the desired recording time mode by pressing the
+ or - button.
SF- H or SF-A* H: Selects the recording time
mode in enhanced fine quality.
FQ- H or FQ-A* H: Selects the recording time
mode in fine quality.
NQ- H or NQ-A* H: Selects the recording time
mode in normal quality.
EX- H or EX-A* H: Selects the recording time
mode in extended time quality.
SP or SP-A*: Freely selectable
indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480,
720, 960, 1200, 1440, 2160, 2880, 3600, 4320,
6480, 8640
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for
recording time, the recording rate and quality are auto-
matically set according to the selected recording time.
Note: It may not be possible to set the recording time,
depending on the remaining storage capacity of the
hard disk.
The factory default setting is SF-24H.
SF- 24H
7.5FPS
SUPER FINE
10S