Logical Delink And Reconfiguration Of Hard Disk (Remove Link) - Panasonic WJ-HD316 Operating Instructions Manual

Logical Delink and
Reconfiguration of Hard Disk
(Remove Link)
Logical delinking of hard disk (Remove Link) is a situation
where a hard disk is not physically removed but a hard disk
is not recognized. You may want to use delinking in the sit-
uation that a hard disk in this unit or an add-on unit fails
(hard disk marked with "*", "LOST" or "ERROR"), and you
would like to disconnect the hard disk temporarily and keep
on operating.
You can activate the delinking function by following the pro-
cedure below.
z Turn on this unit and press the [SET] button after com-
pletion of system check.
Note: If the hard disk is taken out, the top page of the
disk configuration menu automatically appears.
[Screenshot 1]
The top page of the disk configuration menu appears.
HDD DISK MENU
Digital Disk Recorder
WJ-HD300 TOP MENU
Format Mirror ON Mirror OFF Remove Link
1
MAIN 120GB M 120GB M
EXT7 120GB 120GB
120GB 120GB
EXT6
120GB 120GB
EXT5
EXT4 *(120GB) *(ERROR)
ADD (120GB) ADD (ERROR)
EXT3
120GB 120GB
EXT2
EXT1 LOST -
SET : [SET]
x Press the arrows button (A and B) to move the cursor
to "Remove Link" and press the [SET] button.
[Screenshot 2]
A message to confirm delinking appears.
c Move the cursor to "OK" and press the [SET] button.
The remove link function is executed and the check
screen appears.
Restart Close
2 3 4
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
- -
[Screenshot 3]
The remove link function is executed and the check screen
appears.
v The top page of the disk configuration menu automati-
cally resumes after completion of remove link.
131