About The Hdd Safety Mode; Operating The Unit For The First Time - Panasonic WJ-HD316 Operating Instructions Manual

ABOUT THE HDD SAFETY MODE

When maintaining or installing/uninstalling this unit in/from
the rack without turning the power of the unit off, do the
above work operation after setting the HDD SAFETY MODE
to ON.
This can be set on the "Disk Info." menu of "Maintenance".
Refer to page XX for further information.
Important
The HDDs will not start up with the default setting when
installing this unit in the rack without turning the power of
the unit off, to prevent malfunction caused by shock or
vibration.
After completing the installation, set the HDD SAFETY
MODE to OFF. Otherwise, the unit will be unable to operate
when turning the power on after the shutdown caused by
unexpected incident such as power outage.

Operating the unit for the first time

Do the followings when operating the unit for the first time.
Important
When connecting an optional extension unit (WJ-HDE300
series), turn the power of the extension unit before turning
the power of this unit on.
z Turn the POWER switch on the rear
panel of the unit on.
The OPERATE indicator will light and the system check will
start.
The splash window (as shown below) will be displayed on
the monitor 2 and the VGA monitor.
When the system check has been completed, the HDD
SAFETY MODE window (as shown below) will be displayed.
The camera selection buttons on the front panel (1 - 16 for
WJ-HD316, 1 – 9, 0 for WJ-HD309) will light green and
orange (for 2 seconds each) alternately.
60
x Move the cursor to OFF using the
arrows button (A B) and press the
SET button.
The unit will restart automatically and the system check
complete window will be displayed.
c Press the SET button after the
system check complete window is
displayed.
The HDD DISK MENU window will be displayed.
Perform the settings with this menu according to your
needs.
Refer to page XX for further information.
After completing the settings, press any button to close the
HDD DISK MENU.
The login window will be displayed.