Move A Camera To The Preset Position; Auto Panning - Panasonic WJ-HD316 Operating Instructions Manual

v Select "OK" using the arrows button
and press the SET button.
The adjusted camera position (currently displayed on the
monitor) will be registered as a preset position with the
selected preset position number.
To cancel the selected preset position, select "CANCEL"
using the arrows button and press the SET button. The set-
ting will be canceled and the preset registration window will
be closed.
Move a camera to the preset
position
MONITOR1
MONITOR2
1 2 3 4
PAN/TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
10/0
9 11 12 IRIS
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
13 14 15 16
z
x
z Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
x Press a camera selection button (1 -
10/0 for WJ-HD316, 1 - 9, 0 for WJ-
HD309) to select a desired preset
position.
The jog dial also can be used to select a preset position
number by rotating it.
PRESET / AUTO PAN
PRESET
Preset Number
AUTO PAN
c Select "OK" using the arrows button
and press the SET button.
The PRESET/AUTO PAN window will be closed and the
camera will move to the selected preset position.
When selecting "CANCEL" using the arrows button and
press the SET button, the PRESET/AUTO PAN window will
be closed.
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
SEARCH
LAST
SETUP
PAN/TILT
SLOW /ESC
A-B
REPEAT
–
LISTED
SET
BUSY
c c
32
OK CANCEL
Note: To move the camera to another registered preset
position, press the SET button after selecting a desired
preset position number in step 2. The PRESET/AUTO
PAN window will not close and it is possible to select
another preset number continuously.

Auto Panning

Pans a camera automatically from the start point to the end
point registered in advance.
MONITOR1
MONITOR2
1 2
SHIFT SEQ
5 6
DISK SELECT COPY TEXT
9 10/0
EL-ZOOM LOGOUT
13 14
+
316
z Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
x Move the cursor to "AUTO PAN"
using the arrows button and check
the radio button next to "AUTO PAN"
using the jog dial.
PRESET
AUTO PAN
c Select "OK" using the arrows button
and press the SET button.
The PRESET/AUTO PAN window will be closed and auto
panning will start.
During auto panning, it is impossible to register preset posi-
tion. To cancel the auto panning, select "CANCEL" using
the arrows button and press the SET button. The setting will
be canceled and the PRESET/AUTO PAN window will be
closed.
STOP PLAY PAUSE REC - REC STOP
3 4
GOTO
PAN/TILT
SEARCH
LAST
OSD
SETUP
PAN/TILT
7 8 /ESC
SLOW
ZOOM/ A-B
FOCUS REPEAT
–
MARK
11 12 IRIS LISTED
PRESET
LOGOUT
/AUTO
15 16
SET
BUSY
z c v
PRESET / AUTO PAN
32
Preset Number
OK CANCEL
REV FWD
+
316
41