Panasonic WJ-HD316 Operating Instructions Manual page 84

Setting menu
Switcher
Monitor1
Monitor 2
Display
OSD Setup
Monitor1
Monitor2
Com
Camera Control
PS.Data Setup
RS485Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
System
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
84
Perform the settings for the image switching on the monitor 1 such as the setting
of the sequential display or the screen to be displayed at login on the monitor 1.
Monitor2 Perform the settings for the image switching on the monitor 2 such as
the setting of the sequential display or the screen to be displayed at login on the
monitor 2 can be set.
Perform the display settings such as the settings for the display position of the
camera title and the time.
Perform the display settings for the monitor 1 such as the camera title display
on/off, the alarm display on/off and the time display on/off.
Perform the display settings for the monitor 2 such as the task bar style, the cam-
era title display position, and the camera title display on/off.
Set the communication type to control cameras for each camera channel.
Perform the settings for the PSÅEData. It is necessary to perform these settings
when connecting an external device such as a controller to the DATA port on the
rear panel of this unit.
Perform the settings for the RS485. It is necessary to perform these settings when
connecting an RS 485 compatible camera to the RS485 (CAMERA) port on the
rear panel of this unit.
Perform the settings for the SERIAL (RS232C). It is necessary to perform these
settings when connecting a PC to the SERIAL connector on the rear panel of this
unit.
Perform the basic network settings. It is necessary to perform these settings when
operating this unit via a network such as LAN. The settings for the user authentica-
tion and the host authentication also can be set with these settings.
Perform the network connection settings such as IP addresses and the gateway
address. It is necessary to perform these settings when operating this unit via a
network such as LAN.
Perform the NTP server settings such as the NTP server address and the time
zone setting. It is necessary to set to synchronize the clock with the NTP server.
Perform the settings for the basic operation of this unit.
Perform the settings for the time adjustment and display of time and date.
Perform the settings for the user registration and the user authentication such as
user name, password and operational level.
Edit the registered user information.
Delete registered users.
Register the hosts (PCs access this unit via a network) with their information such
as IP address and operational level for the host authentication.
Edit the registered hosts.
Delete the registered hosts.
Perform the settings to specify operable functions in each level.
The set contents can be saved or loaded.
Description Page
n
n