Setting On Mirroring; Start Of Mirroring - Panasonic WJ-HD316 Operating Instructions Manual

Setting on Mirroring

Mirroring is a function that camera images are recorded
into 2 hard disks simultaneously. In case that one hard disk
fails, normal image data stays in the other hard disk. The
credibility of disk can be enhanced.
It is recommended to activate the mirroring function for the
first use of this unit. If the mirroring function is activated
when images are stored in the hard disk, recorded images
will be deleted.
Note: If the hard disk is changed or taken out, the top page
of the disk configuration menu automatically appears.

Start of mirroring

You can activate the mirroring function by following the pro-
cedure below.
z Turn on this unit and press the [SET] button after com-
pletion of system check.
Note: If the hard disk is taken out, the top page of the
disk configuration menu automatically appears.
[Screenshot 1]
The top page of the disk configuration menu appears.
HDD DISK MENU
Digital Disk Recorder
WJ-HD300 TOP MENU
Format Mirror ON Mirror OFF Remove Link
1
MAIN 120GB M 120GB M
EXT7 120GB 120GB
EXT6 120GB 120GB
EXT5 120GB 120GB
*(120GB) *(ERROR)
EXT4
ADD (120GB) ADD (ERROR)
EXT3
EXT2 120GB 120GB
EXT1 LOST -
SET : [SET]
x Press the arrows button (A and B) to move the cursor
to "Format" and press the [SET] button.
[Screenshot 2]
The password entry screen appears.
HDD DISK MENU
Digital Disk Recorder
WJ-HD300 TOP MENU
Format Mirror ON Mirror OFF Remove Link
1
MAIN 120GB M 120GB M
Input Admin Password
EXT7 120GB 120GB
120GB 120GB
EXT6
120GB 120GB
EXT5
EXT4 *(120GB) *(ERROR)
OK
ADD (120GB) ADD (ERROR)
EXT3
120GB 120GB
EXT2
EXT1 LOST -
SET : [SET]
Restart Close
2 3 4
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
- -
Restart Close
2 3 4
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
CANCEL
120GB 120GB
120GB 120GB
- -
c Press the camera selection button and type the pass-
word.
v Press the arrows button (C and D) to move the cursor
to "OK" and press the [SET] button.
[Screenshot 3]
The format screen appears.
b Press the arrows button (A and B) to move the cursor
to "Mirror Format" and press the [SET] button.
[Screenshot 4]
The setting screen of mirror disk record area appears.
n Press the arrows button (A, B, C and D) to select a
recording area and rotate the jog dial to set the capaci-
ty of selected recording area.
For deciding the capacity of two or more recording
areas, repeat this procedure.
m Press the [SET] button after setting.
129