Cancel The Alarm Action; Suspend The Alarm Actions; To Suspend (Deactivate Temporarily) The Alarm Actions; To Stop Suspending The Alarm Actions - Panasonic WJ-HD316 Operating Instructions Manual

Cancel the Alarm Action

When an alarm occurred, this unit will start the alarm action
according to the selected alarm action mode.
To cancel the alarm action, press the ALARM RESET but-
ton.
When "ON" is selected for "Alarm Auto Reset" (on the "Alarm
Setup" menu of "Event"), the followings will be performed
automatically even if the alarm action is not canceled by
pressing the ALARM RESET button on the front panel.
• The ALARM indicator will stop blinking and light steadi-
ly
• The displayed alarm information will disappear
• The buzzer will stop beeping
ALARM
ALARM
SUSPEND
OPERATE
z Press the ALARM RESET button to
cancel the alarm actions.
The ALARM indicator will go off.
44
MONITOR1
MONITOR2
TIMER
1 2 3 4
ERROR
SHIFT SEQ OSD
5 6 7 8
ALARM
RESET
DISK SELECT COPY TEXT MARK
9 10/0 12
11
HDD 1
EL-ZOOM LOGOUT LOGOUT
13 14 15 16
HDD 2
z

Suspend the Alarm Actions

It is possible to suspend (deactivate temporarily) the alarm
actions even when an event occurred.
This function will be useful when required not to activate the
alarm actions for a certain period, such as when configur-
ing the system. However, images and event log will be
recorded even when alarm actions are suspended.
MONITOR1
MONITOR2
TIMER
ERROR
ALARM
D
RESET
HDD 1
E
HDD 2
zx
STOP PLA
GOTO
PAN/TILT
LAST
PAN/TILT
SLOW
ZOOM/
A-B
FOCUS
REPEAT
To suspend (deactivate temporarily)
IRIS
LISTED
PRESET
/AUTO the alarm actions
BUSY
z Press both the ALARM RESET
button and the SET button at the
same time.
The ALARM SUSPEND indicator will light.
To stop suspending the alarm
actions
x Press both the ALARM RESET
button and the SET button at the
same time again.
The ALARM SUSPEND indicator will go off.
Note: When an external switch is connected to the
ALARM/CONTROL connector on the rear panel, it is
possible to suspend the alarm actions using the exter-
nal switch.
In this case, the alarm actions will be suspended when
the external switch is on.
To stop suspending the alarm actions, set the external
switch to off.
STOP
1 2 3 4
GOTO
PAN/TILT
LAST
SHIFT SEQ OSD
5 6 7 8
ZOOM/
A-B
FOCUS REPEAT
DISK SELECT COPY TEXT MARK
9 10/0 12 IRIS
11 LISTED
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
13 14 15 16
316
PLAY PAUSE REC - REC STOP
REV FW
SEARCH
SETUP
PAN/TILT
SLOW /ESC
–
SET
BUSY
zx