[Rec Setup] Perform The Recording For The Basic Recording; Embedded Rec (Time & Date); Table Of Contents; Manual Recording Chanel All - Panasonic WJ-HD316 Operating Instructions Manual

[Recording]
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
SETUP MENU
Maintenance Recording
Switcher Display
Recording Action
Event Setup
External Timer
VMD Setup
Manual Recording Chanel
Alarm Setup
Embedded REC(Title)
Embedded REC(Time & Date)
Terminal Setup
REC Priority
Audio Allocation
q [REC Setup] Perform the recording
for the basic recording.
Perform the following settings for the basic recording.
SETUP MENU
Maintenance Recording
Switcher Display
Recording Action
Event Setup
External Timer
VMD Setup
Manual Recording Chanel
Alarm Setup
Embedded REC(Title)
Embedded REC(Time & Date)
Terminal Setup
REC Priority
Audio Allocation
• Recording Action
Select ON or OFF to record or not record.
ON: Recording will be performed.
No recording will be performed.
Important:
When OFF is selected for this setting, no recordings will
be performed. Select ON for normal use except when
required to stop recording forcefully such as when trou-
ble occurred with the unit.
• [External Timer]
Select ON or OFF to determine whether to start record-
ing when the power is turned on by the connected
external timer (or the switch) or not.
ON: Manual recording will start automatically after com-
pleting the system check.
OFF: Manual recording will not start automatically after
completing the system check.
Important:
When ON is selected, manual recording will start auto-
matically after completing the system check.
Set to ON except when required to stop recording
forcefully such as when the unit is malfunctioning.
Event Schedule
LIVE
Com System
ON
OFF
All
ON
ON
PRIORITY REC MODE
1 Manual REC
2 Event REC
3 Scheduleed REC
AUDIO CAMERA
AUDIO 1 CAM 1
AUDIO 2 CAM 2
AUDIO 3 CAM 3
AUDIO 4 CAM 4
Event Schedule
LIVE
Com System
ON
OFF
All
ON
ON
PRIORITY REC MODE
1 Manual REC
2 Event REC
3 Scheduleed REC
AUDIO CAMERA
AUDIO 1 CAM 1
AUDIO 2 CAM 2
AUDIO 3 CAM 3
AUDIO 4 CAM 4
• [Manual Recording Channel]
Select a camera channel for manual recording from the
followings. Refer to page xx for manual recording.
MON2: Images from the camera channel currently dis-
played on the monitor 2 will be recorded.
ALL: Images from all the camera channels will be
recorded.
Important:
Even though "MON2" is selected, images from all the
camera channels will be recorded while the sequential
display or when live image is not displayed on the mon-
itor 2.
When "MON2" is selected, images from a camera chan-
nel for other manual recording that is started later will
be recorded regardless of the operation using the but-
tons on the front panel or via a network.
• [Embedded REC (Title)]
Select ON or OFF to determine whether to record a dis-
played camera title together as a part of the recorded
image or not.
ON: Record camera titles together as a part of the
recorded image.
OFF: Does not record camera titles.
• [Embedded REC (Time & Date)]
Select ON or OFF to determine whether to record dis-
played time and date together or not.
ON: Record time and date together as a part of the
recorded image.
OFF: Does not record time and date.
Important:
It is possible to select ON or OFF to determine whether
to display the camera title or the time and date record-
ed together with the images even though OFF is select-
ed for "Embedded". (Refer to page XX.)
When ON is selected for "Embedded", it is impossible to
hide the camera title and the time and date. (Refer to
page xx.)
• [REC Priority]
Assigns priorities to recording modes. Assigns priorities
1 (highest) - 3 (lowest) to each recording mode.
Refer to page xx for further information about each
recording mode.
• [Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
91