Any Area Mode; Vector Mode; Duration - Panasonic WJ-HD316 Operating Instructions Manual

, Rotate the jog dial to select "EXIT"
on the status bar to exit from the
motion detection area setup window.
. Press the SET button to display the
VMD search window. Refer to page
xx for further information about each
of the detection mode.
VMD SEARCH
•
ANY AREA
MASKING DURATION
•
VECTOR
A 20 s
•

DURATION

A 20 s
SET : [SET]
⁄0 Move the cursor to select a detection
mode using the arrow buttons and
rotate the jog dial to check the radio
button next to the selected detection
mode. Press the SET button to
determine the selection.
VMD SEARCH
•
ANY AREA
MASKING DURATION
•
VECTOR
A 20 s
•
DURATION
A 20 s
SET : [SET]
Refer to page XX for further information about each of the
detection mode.
<ANY AREA mode>
Move the cursor to the parameter box using the arrows but-
ton [B] to select a masking duration from the following.
1S/1M/1H/24H
34
24H
B 20 s C 20 s D
B 20 s C 20 s D 20 s
SEARCH : [PLAY] CANCEL : [ESC]
24H
B 20 s C 20 s D
B 20 s C 20 s D 20 s
SEARCH : [PLAY] CANCEL : [ESC]
<VECTOR mode>
Move the cursor to an area for the settings of VECTOR
using the arrows button [B] and rotate the jog dial to select
an area. Move the cursor to the parameter box of the
selected area using the arrows button [B] to select an
interval time for an object moving between each area from
the following.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
<DURATION>
Move the cursor to a parameter box of each area using the
arrows button [B] and rotate the jog dial to select a moving
duration for an object in each area from the following.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
Refer to page 28 for further information about the detection
modes.
⁄1 Press the SET button or the
PLAY/PAUSE button to start
searching and display the result of
the VMD search.
VMD SEARCH
TIME&DATE CAM
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*2:34:56 AM APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
⁄2 Rotate the jog dial to select a result
to be displayed.
VMD SEARCH
TIME&DATE CAM
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*12:34:56 AM 01ch
APR.25.03*2:34:56 AM APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
⁄3 Press the PLAY/PAUSE button to
start playback.
The LISTED indicator and the indicator on the PLAY/PAUSE
button will light and playback of the selected recording will
start.
Note: It is possible to skip the playback point to the listed
time (motion detected time) by rotating the jog dial
when the LISTED indicator is lit.
To return to the normal playback, press the LISTED but-
ton.
TOTAL 12345
TOTAL 12345