Displaying On A Multi-Screen; Sequential Display - Panasonic WJ-HD316 Operating Instructions Manual

Displaying on a Multi-screen

It is possible to display images on a multi-screen (4, 7, 9,
10, 13, 16 for WJ-HD316, 4, 7, 9 for WJ-HD306).
z Press the MONITOR1/MONITOR2
button to select the monitor.
When the monitor 1 is selected, the indicator will light.
When the monitor 2 is selected, the indicator will not light.
x Press the SHIFT button.
The SHIFT indicator will light.
c Press a camera selection button 1 - 6
(1 - 3 for WJ-HD306) to select a
desired multi-screen.
Camera selection button 1: 4 split screen
Camera selection button 2: 7 split screen
Camera selection button 3: 9 split screen
Camera selection button 4: 16 split screen (Only for WJ-
HD316)
Camera selection button 5: 10 split screen (Only for WJ-
HD316)
Camera selection button 6: 13 split screen (Only for WJ-
HD316)
The camera selection buttons respective to live images dis-
played on a multi-screen will light green or blue.
When the monitor 2 is selected in step 1, live images will be
also displayed on the selected multi-screen on the VGA
monitor.
To display on a single screen
Press the SHIFT button. The SHIFT indicator will go off.
Press any of camera selection buttons.
Live image will be displayed on a single screen.
When displaying on a 4 split screen
Each time the camera selection button 4 is pressed, dis-
played camera channels will be changed as follows:
WJ-HD316: 1-4 CH – 5-8 CH – 9-12 CH – 13-16 CH
WJ-HD306: 1-4 CH – 5-8 CH – 9 CH
38
When displaying on a 9 split screen
Each time the camera selection button 9 is pressed, dis-
played camera channels will be changed as follows:
Only for WJ-HD316: 1-9 CH – 10-16 CH

Sequential Display

Displayed images from cameras will be switched automati-
cally.
Camera images will be displayed sequentially according to
the settings performed in advance.
z c
MONITOR1
MONITOR2
1 2 3 4
PAN/TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
10/0
9 11 12 IRIS
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
13 14 15 16
x
z Press the MONITOR1/MONITOR2
button to select the monitor.
When the monitor 1 is selected, the indicator will light.
When the monitor 2 is selected, the indicator will not light.
x Press the SHIFT button.
The SHIFT indicator will light.
c Press the SEQ button.
The camera selection button respective to displayed image
will light green.
To stop sequential display, press the SEQ button.
When trying to display on a single screen or multi-screen
during the sequential display, sequential display will be
stopped.
When the monitor 2 is selected in step 1, sequential display
will also start on the VGA monitor.
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
LAST SEARCH
SETUP
PAN/TILT
SLOW /ESC
A-B
REPEAT
–
+
LISTED
SET
BUSY
316