Select A Camera Respective To Recorded Images To Be Played; Start Playback; Stop Playback; Available Functions During Playback - Panasonic WJ-HD316 Operating Instructions Manual

PLAYBACK
It is possible to play recorded image without stopping
recording.
Playback image will be displayed on the monitor 2 and the
VGA monitor.
z
MONITOR1
MONITOR2
R
1 2 3
SHIFT SEQ OSD
5 6 7
DISK SELECT COPY TEXT MARK
9 10/0
11
EL-ZOOM LOGOUT LOGOUT
2 13 14 15
z Select a camera respective to
recorded images to be played. (Go to
step 2 if not necessary)
Press a desired camera selection button.
The pressed camera selection button will light green and
respective live image will be displayed.

Available functions during playback

Pause
Single frame skip
Fast forward/Fast reverse
22
c x
STOP PLAY PAUSE REC - REC STOP
REV
4
GOTO
PAN/TILT
LAST SEARCH
SETUP
PAN/TILT
8
SLOW /ESC
ZOOM/
A-B
FOCUS REPEAT
–
12 IRIS
LISTED
PRESET
/AUTO
16
SET
BUSY
PLAY PAUSE
REV FWD
–
REV FWD
–
x Start playback.
Press the PLAY/PAUSE button.
The indicator on the PLAY/PAUSE button will light and
recorded image of the selected camera will be played.
First playback after login: The latest recorded image will
be played.
With the default setting, playback will start 5 seconds
FWD
before the start time of the latest recorded image. Start
time can be selected from the following:
+
5 s before/10 s before/30 s before/1 m before/5 m
before
316
Refer to a system administrator about the settings.
Other than those above: Playback will start from the end
point of the recorded image played last time.
c Stop playback.
Press the STOP button.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live image will be displayed on the monitor 2 and the VGA
monitor.
Pressing the PLAY/PAUSE button to pause playback. While pausing,
the indicator on the PLAY/PAUSE button will blink.
Pressing this button again will resume playback.
Rotating the jog dial during pause will skip to the next or previous
frame.
Rotating the jog dial clockwise will skip to the next frame and rotating
+
it counterclockwise will skip to the previous frame.
Rotating the shuttle ring will change the playback speed (1/2x, 1x, 2x,
5x, 10x, 20x) according to rotated degree. When the shuttle ring is
held in the 20x position (rotated to the end) for 10 seconds, the play-
back speed will be 50x. When the shuttle ring is held 5 more seconds
+
after the playback speed became 50x, the playback speed will be
100x.
Rotating the shuttle ring clockwise will play at fast speed and rotating
it counterclockwise will play reversely at fast speed.
To play at normal speed, release the shuttle ring.