Rear View Wj-Hd316 & Wj-Hd309 - Panasonic WJ-HD316 Operating Instructions Manual

Rear View
[WJ-HD316]
[WJ-HD309]
q Audio Input Connectors (AUDIO IN 1 - 4)
These connectors, for RCA pin jacks, accept an unbal-
anced –10 dBV, 10 k
from an external device such as a microphone amplifi-
er.
w Audio Output Connector (AUDIO OUT)
This connector, for an RCA standard jack, supplies an
unbalanced –10 dBV, 600
an external device.
Recorded audio will be supplied from this connector
during playback.
e Video Input Connectors (CAMERA IN 1 - 16 for WJ-
HD316/CAMERA IN 1 - 9 for WJ-HD309)
Connect system cameras or combination cameras to
these BNC connectors.
A 75 termination is made unless the video output ter-
minal is connected.
To connect combination cameras, connect them to the
CAMERA IN 1 - 8 connectors of the WJ-HD316, or the
CAMERA IN 1 - 6 of the WJ-HD309 (accept connection
with coaxial cables).
r Video Output Connectors (CAMERA OUT 1 - 16 for
WJ-HD316/CAMERA OUT 1 - 9 for WJ-HD309)
These BNC connectors supply video signals looped
through the video input connectors.
Note: Video signals will not be supplied from the CAM-
ERA OUT 1 - 6 connectors of the WJ-HD309 if the
power of the WJ-HD309 is off.
10
q w t y u i
1
3 1
SERIAL
CASCADE
4 2 OUT
2
AUDIO IN AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA)
16 15 14 13 12 11
IN
OUT
16 15 14 13 12 11
q w t y u i
1
3 1
SERIAL
CASCADE
4 2 OUT
2
AUDIO IN AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA)
line input audio signal supplied
line output audio signal to
o !0 !1 !3 !5
e !2 !4 !6
MODE
COPY 1
ALARM
2 1
ALARM/CONTOROL
DATA RS485(CAMERA) 10/100BASE-T EXT STORAGE
10 9 8 7 6 5 4 3 2
10 9 8 7 6 5 4 3 2
VIDEO
r
o !0 !1 !3 !5
e !2 !4 !6
MODE
COPY 1
ALARM
2 1
ALARM/CONTOROL
DATA RS485(CAMERA) 10/100BASE-T EXT STORAGE
9 8 7 6 5 4 3 2
IN
OUT
9 8 7 6 5 4 3 2
VIDEO
r
t Monitor Output Connector (MONITOR OUT1, MONI-
TOR OUT2/CASCADE OUT)
Connect monitors to these BNC connectors.
The MONITOR OUT2 connector can also be used as
the CASCADE OUT connector.
When using two or more units of WJ-HD316/WJ-HD309
and use the MONITOR OUT2 connector as the CAS-
CADE OUT connector, connect with the CASCADE IN
connector of another WJ-HD316/WJ-HD309.
y Cascade In Connector (CASCADE IN)
Connect with the CASCADE OUT connector of another
WJ-HD316/WJ-HD309 when using two or more units of
WJ-HD316.
u Serial Connector (SERIAL)
Connect a PC with this D-Sub 9-pin connector when
controlling this unit.
i Monitor Connector (MONITOR (VGA))
Connect a VGA monitor with this connector. The same
video signal supplied to the MONITOR OUT2 connector
will be supplied to this connector.
o Alarm Connector (ALARM)
Connect an external device such as a sensor or a door
switch with this D-SubD-Sub 25-pin connector.
!0 Alarm/Control Connector (ALARM/CONTROL)
Connect a control switch with this D-Sub 25-pin con-
nector when controlling this unit using an external
device, or when controlling an alarm device such as a
buzzer or a lamp.
!8
!7
SIGNAL GND
POWER
1
AC IN
1
!9
!8
!7
SIGNAL GND
POWER
1
AC IN
1
!9