Rack Installation (Cj-Hdr416A Only); Front Panel; Cj-Hdr216A - Panasonic CJ-HDR216A Quick Start Manual

1.5 Rack Installation (CJ-HDR416A only)

The DVR occupies 1.5U rack units of vertical rack space.

Use twelve screws to fix the unit.

Please make sure the indoor temperature is below 35°C (95°F).

Please make sure there is 15cm (6 inches) space around the device to guarantee sound
ventilation.

Please install from the bottom to the top.

If there are more accessories connected in the rack, please take precaution measures in case
the rack power is overload.

1.6 Front Panel

1.6.1 CJ-HDR216A

The front panel is shown as below. See Figure 1-1.
Please refer to the following sheet for front panel button information.
Name
Power button
USB port
Up/1
/
Down/4
Left/2
/
Right/3

Play/Pause/5

Reverse/Pause/6

Fast forward/7
Slow playback/8
│
Play next /9
│
Play previous/0
Record indicator 1～16
Figure 1-1
Icon Function
Press this button to boot up or shut down the device.
Connect to USB2.0 storage device, mouse and etc.

Activate current controls, and then move up, move down or
jump.

Change setup, increase/decrease numeral.

Assistant function such as PTZ menu.

Switch channel when playback.

Switch current activated controls, move up and down.

When device is in 1-channel playback mode, use it to control
playback control bar process.
When playback, click it to pause, click it again to play again.
When playback, click it to begin reverse play.
When playback, it supports various fast forward speeds and
normal playback.
When playback, it supports various slow playback speeds and
normal playback.
When playback, click it to view the next record.
When playback, click it to view the previous record.
It is to display system is recording or not.
The light becomes on when system is recording.
3