Control Cpu Settings; Multiple Cpu Synchronized Boot-Up; Multiple Cpu High Speed Transmission Area Setting - Mitsubishi MELSEC-Q Series User Manual

6
PARAMETER ADDED FOR MULTIPLE CPU SYSTEM

6.1.6 Control CPU settings

Sets up the control CPUs (Control PLCs) for the I/O modules and intelligent function
modules mounted on the base unit in the multiple CPU system.
All default settings are set to CPU No.1.

6.1.7 Multiple CPU synchronized boot-up

This is set for synchronizing the boot-up time for each CPU module.
(

6.1.8 Multiple CPU high speed transmission area setting

This is set when the auto refresh is performed using the multiple CPU high speed
transmission area in the multiple CPU system.
(
POINT
Diagram 6.3 Control CPU setting screen
Section 4.5)
Section 4.1.3)
The multiple CPU synchronized boot-up and the multiple CPU high speed
transmission area setting are available when the following CPU modules are
used.
• Universal model QCPU (except Q02UCPU )
• Motion CPU (Q172DCPU, Q173DCPU )
6.1 Parameter list
6.1.6 Control CPU settings
1
2
3
4
5
6
7
8
6
- 9