Mitsubishi MELSEC-Q Series User Manual page 217

5
PROCESSING TIME OF QCPU IN MULTIPLE CPU
SYSTEM
High
Performance
Note5.5
Process
Note5.6
Universal
UD
Note5.7
Note3
High
The CC-Link IE controller network can only use the High Performance model QCPU whose first 5
Performance
digits of serial No. is 09012 or later.
Note5.5
Process
The CC-Link IE controller network cannot use the Process CPU.
Note5.6
Universal Since the Universal model QCPU does not support transfer between data links, adding the
UD
number of points for transfer between data links is unnecessary.
Note5.7
2) For High Performance model QCPU
model QCPU
(Extension time) = (No. of transmission/reception word points)
The number of transmission/reception words is the total number of
transfer data below.
Link refresh data
Data transferred to file register of memory card :
Transfer between data links
Use the values in Table5.10 for
Table5.10 Time increased by coincident refresh request from a network module of another
High Performance model
QCPU/Process CPU
Univwesal model QCPU
Q02CPU
Q02HCPU, Q06HCPU,
Q12HCPU, Q25HCPU
Q02PHCPU, Q06PHCPU,
Q12PHCPU, Q25PHCPU
Q02UCPU, Q03UDCPU,
Q04UDHCPU, Q06UDHCPU,
Q13UDHCPU, Q26UDHCPU,
Q03UDECPU, Q04UDEHCPU,
Q06UDEHCPU, Q13UDEHCPU,
Q26UDEHCPU
Note5.5
/Process CPU
N5
(LB + LX + LY + SB)
:
(LB + LX + LY + SB)
LB
Note5.7
:
+ LW
16
N5Note3
System with main base unit
only
0.54 s
5.2 Factors for prolonged Scan Time
Note5.6
/Universal
(No. of other CPUs) ( s)
+ LW+SW
16
+ LW+SW
16
2
N5
System including
extension base unit(s)
1.30 s
5
1
2
3
4
5
6
7
8
- 8