Mitsubishi MELSEC-Q Series User Manual page 95

2
SYSTEM CONFIGURATION
(3) When using the Process CPU
1
Memory card *
POINT
Memory card *
PC card adapter
* 1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
* 2: For writing into memory card by GX Developer and information on USB cables, refer to the
operating manual of the GX Developer.
* 3: The available version varies depending on the system configuration. (
Diagram 2.25 Configuration of peripheral devices
For connection between the Motion CPU, PC CPU module or C Controller module
and peripheral in the multiple CPU system, refer to the manual of each CPU
module.
Process CPU
1
PC(GX Developer, GX Configurator,
3
PX Developer) *
2.2 Configuration of peripheral devices
1
2
RS-232 cable
3
2
USB cable *
4
Section 2.3)
5
6
7
8
2
- 42