Mitsubishi MELSEC-Q Series User Manual page 96

2
SYSTEM CONFIGURATION
(4) When using the Universal model QCPU
Memory card *
2
- 43 2.2 Configuration of peripheral devices
(a) For the QnU(D)(H)CPU
1
PC card adapter
* 1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
* 2: For writing into memory card by GX Developer and information on USB cables, refer to the
operating manual of the GX Developer.
* 3: The available version varies depending on the system configuration. (
Diagram 2.26 Configuration of peripheral devices
POINT
For connection between the Motion CPU, PC CPU module or C Controller module
and peripheral in the multiple CPU system, refer to the manual of each CPU
module.
Universal model QCPU
Memory card * 1
PC(GX Developer, GX Configurator) *
RS-232 cable
3
USB cable *
Section 2.3)
2