Cardinal Health Alaris GW Technical & Service Manual page 55

General specifications (continued)
Calibration units of measure
Dimensions
Weight:
Recycling
Disposal of Alaris® GW Volumetric Pump components:
Follow local governing ordinances and recycling instructions regarding disposal or recycling of pump components, including batteries.
Alaris® GW Volumetric Pump
Specifications
Specifications
The units of measurement used in the calibration procedure are:
1. Millilitres (ml) volume of fluid.
2. Millilitres per hour (ml/h) for volumetric flow rate.
3. Millimetres of mercury (mmHg) or KpA for pressure.
4. Hours:minutes (h:min) for time.
5. Volts (V) for battery voltage.
137mm (w) x 140mm (h) x 105mm (d).
1.5kg (excluding power cable).
/77 1000SM00006 Issue 4