Configuration Settings - Assa Abloy SECURITRON DEM680E Series Installation & Operating Instructions Manual

Delayed Egress
status LEDs
The two LEDs shown display the
following Delayed Egress states.
RED GREEN
OFF OFF
OFF ON
ON OFF
ON ON
Documenting the

configuration settings

1
Indicate the settings on the adhesive-backed labels
included with the Magnalock (see Diagram 32).
2
Complete the labels and affix them to the inside
of the Magnalock cover (see Diagram 33).
Behavior of Delayed
Egress Magnalocks with
regional settings
California
Upon power up, lock goes into an alarm state
and requires a manual reset. Nuisance delay
is settable to 0, 1, 2 or 3 seconds and the exit
delay is fixed at 15 or 30 seconds. Bypass delay
is settable to 0, 15, 30 or 45 seconds. A manual
reset is required after a delayed egress event.
Chicago
Upon power up, lock goes into an alarm state and
requires a manual reset. Nuisance delay is fixed at
1 second, the exit delay is fixed at 15 seconds, and
the bypass delay is fixed at 0 seconds. A manual
reset is required after a delayed egress event.
8 of 12
Diagram 31 LED location
STATE
Unlocked
Bypass
Egress Alarm
Locked
Diagram 32 System settings
Diagram 33 Settings labels