Table of Contents
Advertisement
12 Start-up
12.2.10
Additional door information
12.2.11
Configuration parameters
Parameter name
Hold open time
Opening time
Closing time
Arm system
Push and go
Power assist
Extend closing torque*
Stop on stall
Select lock voltage
Select lock power
Push and close
Key impulse hold open
time
Number of lock retries
Lock kick
Reverse upon obstruc-
tion
Lock release time
Ratchet function
Note! * Extend closing torque is 7 Level (Lowest) - 10 Level (Highest) for no spring version.
52
Default settings
5s
4.5s
4.5s
Push / Pull / Sliding push / Concealed in-
stallation
Not active
Off
0 Level (Lowest)
Active
12V / 24V
Lock with power / Lock without power
Not active
5s
1 time
Not active
Active
0.5s
Not active
Issue 2023-01-17
Value
2s - 6h
3s - 8s
4.5s - 9s
Push / Pull / Sliding push / Concealed in-
stallation
Not active / Active
Off / Low / Medium / High
0 Level (Lowest) - 10 Level (Highest)
Not active / Active
12V / 24V
Lock with power / Lock without power
Not active / Active
2s - 25s
0 - 2 times
Not active / Active
Not active / Active
0s - 5s
Not active / Active
1022077-en-4.0
Advertisement
Table of Contents
