Assa Abloy Corbin Russwin DC8200 Series Installation Instructions Manual

Installation Instructions
DC8200 Series
Universal Door Closer with Unitrol
DC8210 Series Multi-Sized from 1 through 6
Standard Application
with 615F58 Bracket
IMPORTANT:
y An improperly installed or incorrectly adjusted door closer may cause property damage and/or personal injury; and will void product
warranty.
y To avoid personal injury, DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
y Door closers must be securely fastened to a properly reinforced door and frame with fasteners provided.
y Door closers with a HOLD OPEN ARM (A12) are not permitted to be installed in fire door assemblies.
y Door and frame must be specifically templated for 85°, 90°, 95°, 100°, 105°, or 110° door swing.
Type of Exterior
Interior
Installation In-swinging
2'4"
2'6"
3'0"
Parallel
Arm
3'6"
4'0"
4'6"
**These forces are for standard templating with bearing type hinges and do not account for pressure differentials and drafts.
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2006, 2009, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY
Access and Egress Hardware Group, Inc. is prohibited.
Deep Reveal Application
with M103 Option (615F59 Clamp Kit)
Size of Door & Door Closer
Exterior Recommended
Out-swinging Closer size
— —
— —
— 2'6"
— 3'0"
— 3'6"
— 4'0"
Approved 2022-12-12
Arms (by Norton Rixson)
®
**Max. Opening
Force (lbs/f)
1 8
2 14
3 16
4 22
5 24
6 26
WARNING
Attention Installer: Improper installation may result in
damage to the product and void the factory warranty.
80-9380-8003-152 Rev 3 12/22
A11 Arm
Non-Hold Open Arm
A12 Arm
Hold Open Arm
Flush Partition Application
with M104 Option (615F60 Bracket)
To Determine
Hand of Door: