Installation Instructions
DC8200 Series
Universal Door Closer DC8210 Tri-Pack Standard
DC8200 Series Multi-Sized from 1 through 6
DC8200
Regular Arm
Refer to Pages 2 & 3
DC8210
Parallel Arm
Refer to Pages 4 & 5
DC8220
Jamb Mount
Refer to Pages 6 & 7
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2006, 2009, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY
Access and Egress Hardware Group, Inc. is prohibited.
IMPORTANT:
y An improperly installed or incorrectly adjusted door closer may cause property damage and/or
personal injury; and will void product warranty.
y To avoid personal injury, DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
y Door closers must be securely fastened to a properly reinforced door and frame with fasteners
provided.
y Door closers with the "A1" HOLD OPEN ARM option are not permitted to be installed in fire door
assemblies.
BEFORE INSTALLING:
y The Americans with Disabilities Act (ADA) requires that doors having door closers have an
opening force not to exceed 5 lbf. Use standard templating for regular arm and parallel arm
applications. Jamb mounted applications use the template for 140° door opening to achieve the
required opening force.
y The door closer's power size adjustment feature may require adjustment to its lowest setting to
comply with ADA opening force guidelines.
y An auxiliary door stop, by others, is strongly recommended to avoid damage to the door closer
and adjacent property.
y Doors should be hung on ball bearing or anti-friction hinges/pivots.
y Door closer must not be installed on the exterior of a door in an exterior wall of a building.
y ADA compliant closers are: DC8200, DC8210, DC8220.
Type of
Interior
Installation
2'4"
3'0"
Regular
3'6"
&
4'0"
Top Jamb
4'6"
5'0"
2'4"
2'6"
3'0"
Parallel
Arm
3'6"
4'0"
4'6"
**These forces are for standard templating with bearing type hinges and do not account for pressure differentials and drafts.
To Determine
Hand of Door:
Approved 2022-12-12
Size of Door & Door Closer
Exterior
Exterior
In-swinging
Out-swinging
—
—
—
—
2'6"
3'0"
3'0"
3'6"
3'6"
4'0"
4'0"
4'6"
—
—
—
—
—
2'6"
—
3'0"
—
3'6"
—
4'0"
WARNING
Attention Installer: Improper installation may result in
damage to the product and void the factory warranty.
80-9380-8000-152 Rev 3 12/22
Recommended
**Max. Opening
Closer size
Force (lbs/f)
1
8
2
14
3
16
4
22
5
24
6
26
1
8
2
14
3
16
4
22
5
24
6
26