Interface Modules; Nsqm1Gt4Pfc - H3C SecPath F100-X-G3 Installation Manual

Figure1-12 Rear panel
1
(1) Power supply slot 1
(3) Interface module slot 2
(5) Grounding screw
(7) Interface module slot 1

Interface modules

CAUTION:
The interface modules are not hot swappable.
Table1-1 describes the compatible slots for the interface modules.
Table1-1 Interface module and device slot compatibility
Interface
module

NSQM1GT4PFC

NSQM1GP4FBA
NS-NIM-TG4A3
NS-NIM-TG6A
NSQM1GT4PFC
The NSQM1GT4PFC interface module provides four 10/100/1000BASE-T copper ports.
•
When the firewall is operating correctly, the four ports operate as common data ports.
•
When the firewall is powered off, the four ports are divided into two bypass port pairs with ports
0 and 1 in one pair and ports 2 and 3 in another pair. The two ports in a pair can act as the uplink
and downlink interfaces for a Layer 2 link and form a bypass link. This enables traffic to be
transmitted through the firewall even if the firewall is powered off and ensures service
continuity.
2
F100-S-G3
F100-M-G3 F100-A-G3
F100-C-G3
Not supported Slot 1
Not supported Slot 1
Not supported Slot 1
Not supported Not supported
3
7
(2) Power supply slot 2
(4) Interface module slot 4
(6) Interface module slot 3
F100-E-G3
Slots 1 and 2
Slots 1 and 2
Slots 1 and 2
Not supported
6
4
6
F1000-S-G
F1000-C-G3 F1000-A-G
F1000-E-G3
Slot 2 Slots 2 and 4
Slot 2 Slots 2 and 4
Slot 2 Slots 2 and 4
Slot 1 Slots 1 and 3
5